How To Connect Your Cd Player, Vcr Or Computer; How To Connect Your Portable Cd Player - NordicTrack CXT 910 User Manual

Ntel59010
Hide thumbs Also See for CXT 910:
Table of Contents

Advertisement

right bar graph changes,
increase
or decrease
your pace so that the same number of bars
appear in both bar graphs. If your pace is slower
than the current pace setting, the increase
arrow
will also appear in the display; if your pace is
faster than the pace setting, the decrease
arrow
will appear. Important:
The pace settings for
the program
are intended
only to provide a
goal. Your actual pace may be slower than the
pace settings,
especially
during the first few
months of your exercise
program.
Make sure
to exercise
at a pace that is comfortable
for
you.
During the program, the display will show the
time remaining in the program. When no time
remains, the program will be completed. If you
continue to exercise after the program is complet-
ed, the display will continueto show your exer-
cise feedback.
r_
Follow your progress with the feedback
modes.
Refer to step 4 on page 12.
B
When you are finished exercising,
the console
will automatically
turn off after five minutes.
Refer to step 6 on page 13.
HOWTO CONNECT YOUR CO PLAYER, VCR,
OR COMPUTER
To use iFIT.com CDs, the elliptical crosstrainer must
be connected to your portable CD player, portable
stereo, home stereo, or computer with CD player. See
pages 15 to 17 for connecting instructions.To use
iFIT.com videocassettes, the ellipticalcmsstrainer
must be connected to yourVCR. See page 17 for con-
necting instructions.To use iFIT.com programs
directly from our Web site, the ellipticalcmsstrainer
must be connected to your home computer. See page
17 for connecting instructions.
HOW TO CONNECT
YOUR PORTABLE
CD PLAYER
Note: If your CD player has separate LINE OUT
and PHONES jacks, see instruction A below. If
your CD player has only one jack, see instruction B.
A. Plug one end of a 1/8" to 1/8" stereo audio cable
(available
at electronics
stores) into the jack
beneath the console.
Plug the other end of the
cable into the LINE OUT jack on your CD player.
Plug your headphones
into the PHONES jack.
B. Plug one end of a 1/8" to 1/8" stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8" Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your CD player. Plug your headphones into the
other side of the Y-adapter.
_l_e__
Headphones_
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ntel59010

Table of Contents