Nikon D7000 User Manual page 97

Selecting Yes allows adjustments that are normally made by holding the I_, _, ISO,
qUA[,WB, AF-mode, =o=, o r BKT button and rotating a command dial to be made by
rotating the command dial after the button is released (this also applies to the Fnand
depth-of-field preview buttons if they have been assigned Active D-Lighting using
Custom Setting f3, Assign Fn button, or Custom Setting f4, Assign preview button).
Setting ends when any of the affected buttons is pressed again or the shutter-release
button is pressed halfway. Except when No limit is selected for Custom Setting c2
Auto meter-off delay, setting will also end when the exposure meters turn off.
Selecting Enable release allows the shutter to be released when no memory card is
inserted, although no pictures will be recorded (they will however be displayed in the
monitor in demo mode). If Release locked is selected, the shutter-release button is
only enabled when a memory card is inserted in the camera.
At the default setting of ,.. o..,
+_,,,,,,I,,,,,,_" (+o-), the exposure indicators in the
viewfinder and information display are displayed with positive values on the left and
negative values on the right. Select .... o..,
_,,,,,il,,,,,, .I- (-o+) to display negative
values on the left and positive values on the right.
234