Nikon D7000 User Manual page 90

6
7
8
9
Compose the shot.
Compose the shot and arrange the flash units as shown below. Note that the
maximum distance at which the remote flash units ca n be placed may vary with
shooting conditions.
60°orless 5m/15ft. or Wireless remote sensors
' ° ' less on flash units should face
10m/33 ft. omess 30 omess ,_
,. _ / camera
:. ,¢:,= Camera
_'_,^ _ -_" (built-in flash)
30 orless &
...... [
._ _ 5m/15ft. orless
_ o
60 orless
Set the remote flash units to the selected channel.
Turn all the remote flash units on and set them to the channel selected in
Step 4. See the flash unit instruction manuals for details.
Raise the built-in flash.
Press the _ button to raise the built-in flash. Note that even if- - is selected for
Built-in flash > Mode, the built-in flash must be raised so that monitor
preflashes will be emitted.
Frame the photograph, focus, and shoot.
After confirming that the camera flash-ready light and the flash-ready lights for
all other flash units are lit, frame the photograph, focus, and shoot. FV lock
(_ 149) can be used if desired.
227