Nikon COOLPIX S9100 User Manual page 73

Problem
Nikon Transfer 2 does not start
when camera is connected.
The PictBridge startup screen is
not displayed when the
camera is connected to a
printer.
Images to be printed are not
displayed.
Cannot select paper size with
camera.
Camera is off.
Battery is exhausted.
USB cable is not correctly connected.
Camera is not recognized by the computer.
Confirm system requirements.
Computer is not set to start Nikon Transfer 2
automatically.
For more information on Nikon Transfer 2,
refer to help information contained in ViewNX
2.
Cause/Solution
]g
24
158
157
161
With some PictBridge-compatib]e printers, the
PictBridge startup screen may not be dispJayed
and it may be impossible to print images when
Auto is selected for the Charge by computer
option in tile setup menu. Set tile Charge by
computer option to Off and reconnect the
camera to the printer.
Memory card contains no images. Replace the
memory card.
Remove the memory card to print images
from the internal memory.
Paper size cannot be selected from the camera
in the following situations, even when printing
from a PictBridge<ompatible printer. Use the
arinter to select paper size.
The printer does not support the paper sizes
specified by the camera.
The printer automatically selects the paper
size.
187
22
165,
166
2-
ff
8
o_
211