Nikon COOLPIX S9100 User Manual page 40

W
n
tlit I
Vibration Reduction
MENU button -') V menu) (_:]] 170) -) Vibration reduction
(Setup
Choose a vibration reduction option for shooting still images.
Vibration reduction effectively reduces blur, caused by slight hand movement
known as camera shake, which commonly occurs when shooting with the camera
zoomed in or at slow shutter speeds.
Set Vibration reduction to Off when shooting still images while using a tripod
to stabilize the camera.
(,IJ_ On (hybrid)
The effects of camera shake are corrected optically using an image sensor shift
method, and electronic vibration reduction is also used in the following situations to
process images:
• When the flash does not fire
• When the shutter speed is slower than 1/60 seconds
• When Self-timer is disabled
• When ISO sensitivity is 200 or lower
_} On (default setting)
An image sensor shift method is used to reduce the effects of camera shake when
capturing still images.
Camera automatically detects the panning direction and only corrects for vibration
due to camera shake. When the camera is panned, for example, vibration reduction
reduces only vertical shake. If the camera is tilted, vibration reduction affects only
horizontal shake.
OFF off
Vibration reduction is not enabled.
The current vibration reduction setting can be confirmed in the camera monitor
with shooting (_ 6, 25, 140). When Off is selected, no icon is displayed.
178
[] Vibration Reduction for Movies
Vibration reduction for movie recording car/be set with Electronic VR (_ 151) in the movie menu