Table of Contents
Advertisement
MAINTENANCE
ENGINE MAINTENANCE
Uaethefollowing maintenence sectiontokeep
your unitin good operaUnjJ oonditlon. All the
maintenanceinformation for the engine is in
the "EngineInstruction Book".Beforeyoustart
the engine,read this book.
WARNING: Before you make an
A
Inspsatlon, adjustment
(except
carburetor), or repair, stop the
engine and disconnect the wire
from the spark plug.
HOW TO CLEAN
THE MOWER HOUSING
WARNING: "lTmblade will rotate
A
when the engine runs. Before
you clean the mower housing,
stop the engine end disconnect
the wire from the spark plug.
Grass sad o_er debris can keep the mower
fTomworkingcon'ectly. A fter you mow,clean
the mowerhousingas follows.
1. Stopthe engine.
2. Disconnectthe wire from the sparkplug.
3. Cleanthetopend the bottomofthe mower
housing.
LUBRICATION
1. For maximum performsace,lubdcatethe
wheels end all pivotpointswithengineoil
every 25 hours.
2. To lubricatethe engine, refer to the =En-
gineInstructionBook".
NOTE: Do not lubricate the engine stop
cable. Lubrlcenta will damage the cable
and prevent the cable from moving freely.
Replace the cable If bent or damaged.
HOW TO ADJUST
THE HEIGHT OF CUT
WARNING: "me blade will rotate
A
When the engine runs. Before
you change the height of cut,
stop the engine sad disconnect
the wire from the apark plug,
To change the height of cut, move the position
ofthe adjuster arm at each wheel (Figure 10).
Make sure each adjuster arm is In the same
posltlen so that the mower will cut lev_.
1.
Disengage the adjuster arm.
2.
Move the adjuster
Mm to another posl-
tioo.
Figure10
F-98529
16
Advertisement
Table of Contents
