Dell Studio One 19 Service Manual page 12

1 touch pad cable
3 touch panel cable
Replacing the Support Assembly
1. Follow the instructions in Before You
2. Reconnect the following cables to the LCD panel:
LVDS cable from LVDS connector
l
touch pad cable from the touch pad connector
l
touch panel cable from the touch panel module
l
3. Replace the fourteen screws that secure the support assembly to the LCD panel.
4. Replace the hard drive (see
5. Replace the power supply unit (see
6. Replace the optical drive (see
7. Replace the inverter (see Replacing the
8. Replace the side I/O panel (see
9. Replace the system board (see
Back to Contents Page
2 LVDS cable
4 LCD panel
Begin.
Replacing the Hard Drive).
Replacing the Power Supply
Replacing the Optical Drive).
Inverter).
Replacing the Side I/O Panel).
Replacing the System Board).
Unit).