Setting Up The Monitor; Attaching The Base; Connecting Your Monitor; Connecting The Blue Vga Cable - Dell ST2010B User Manual

Back to Contents Page

Setting Up the Monitor

Dell™ ST2010B Flat Panel Monitor User's Guide
Attaching the Base
Connecting the Monitor
Attaching the Soundbar (optional)
Removing the Stand

Attaching the Base

NOTE: The base is detached when the monitor is shipped from the factory.
After placing the monitor panel on soft cloth or cushion, complete the following steps to attach the base.
1. Place the monitor on a stable flat table.
2. Fit the groove on the base onto the riser of the monitor.
3. Push the hook to lock the stand base.

Connecting Your Monitor

CAUTION: Before you begin any of the procedures in this section, follow the

Connecting the blue VGA cable

CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.
Safety Instructions.