Operating The Monitor; Using The Front Panel; Using The On-Screen Display (Osd) Menu; Accessing The Menu System - Dell ST2010B User Manual

Back to Contents Page

Operating the Monitor

Dell™ ST2010B Flat Panel Monitor User's Guide
Using the Front Panel Controls
Using the On-Screen Display (OSD) Menu
Setting the Maximum Resolution
Using the Dell Soundbar (Optional)
Using the Tilt

Using the Front Panel

Use the buttons on the front of the monitor to adjust the image settings.
The following table describes the side panel buttons:
1-2 Shortcut keys
1
Preset Modes
2
Brightness/Contrast
3
OSD Menu
4
Exit
5
Power button
(with power light
indicator)

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves the changes. The
changes are also saved if you change the settings and then wait for the OSD menu to disappear.
Use this key for direct access to the control menu that you define in the personalize menu.
*The default settings are Preset Modes Select, Brightness/Contrast Select
Use this button for different displays on your monitor.
Use Preset Modes button to select between different display modes that may be connected to your monitor.
Displays the modes selection bar. Press
you want.
Use this button for direct access to the "Brightness/Contrast" control menu.
Use this key to open the on-screen display (OSD). See
Use this key to exit the OSD menu.
Use the power button to turn the monitor on and off.
The white light indicates the monitor is on and fully functional. An amber light indicates power save mode.
or button to move between the setting options and press
Using the OSD Menu.
to select the display modes