Dell ST2010B User Manual page 17

Wide Mode Adjusts the image ratio as 1:1, Aspect or full screen.
NOTE: Wide Mode adjustment is not required at maximum preset resolution 1600 x 900.
Horizontal Position
Use the
Vertical Position
Use the
Sharpness
This feature can make the image look sharper or softer. Use
Pixel Clock T
he Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through
the main OSD menu, by selecting 'Image Settings'.
Use
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
(fine), again.
NOTE:
Reset Display Resets the display settings to the original factory settings.
Settings
Back
Press
Other Settings Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on
screen, and so on.
Language Language option to set the OSD display to one of six languages (English, Espanol, Francais, Deutsch, Simplified chinese or
Japanese).
Menu Transparency
Select this option to change the menu transparency by pressing
or button to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
or button to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
or button to adjust for best image quality.
Pixel Clock and Phase Adjustments are only available for "VGA" input.
to go back to the main menu.
or to adjust the sharpness from '0' to '100' .
or (Minimum: 0 ~ Maximum: 100).