MTD 11A-414E729 Operator's Manual page 39

5. An adjustingplateand thumb leverat each wheel
positionprovidescuttingheightadjustment.
a. Depresslevertowardswheel.
b. Moveit to anyof the ninepositionsfor desired
cutting height.SeeStep 5.
c. Releaselevertowardsmowerdeck.
6. Followstepsbelowto assemblethe grasscatcher:
a. Placebag overframe sothat its black plasticside
is at the bottom.
b. Slip plasticchannelof grass bagoverhooks on the
frame.See Step6. All the plasticchannelsexcept
centertop of bagattachfrom outsideof frame.
c. Attachcentertop of bag from insideof frame.
7. Followstepsbelowto attachgrass catcher:
a. Lift rear dischargedoor.
b. Placegrass catcheron thepivot rod. Letgo
of dischargedoor sothat it restson thegrass
catcher.See Step7.
To removegrass catcheror convertto a mulcher,lift rear
dischargedooron the moweras shownin Step8. Lift
grass catcherup and out of the pivot rod.Releaserear
dischargedoorto allow it to close rear openingof mower.
__IK ARNING: Never operate mower
unless the hooks on the grass
catcher are firmly seated on the
pivot rod, and the rear discharge
door rests firmly against top of
the grass catcher.
Step 5
Step 6
\
..... J
Step 7
7
uStment
CUTTING HEIGHT
Step5
All wheelsmust be
placedin the same
relative positionl
GRASS CATCHER
Step e
Makecertain bag is
turned right side out
before assembling
(warning label Willbe
on the outside):
WARNING
Never operate mower
unless the hooks on
the grass catcher are
firmly seated on the
_ivot rod, and the
rear discharge door
rests firmly against
top of the grass
catcher.