Setting Up The Monitor; Attaching The Stand; Connecting Your Monitor; Connecting The Blue Vga Cable - Dell E1709WFP User Manual

Flat panel monitor

Hide thumbs Also See for E1709WFP:

Table of Contents

Back to Contents Page

Setting Up the Monitor

Dell™ E1709W Flat Panel Monitor User's Guide

Attaching the Stand

Connecting Your Monitor

Organizing Your Cables

Removing the Stand Base

Removing_the_Stand_for_VESA_wall_mount

NOTE:

The stand is detached when the monitor is shipped from the factory.

To attach the base of the stand to the monitor stand:

1. Place the monitor stand base on a stable table top.

2. Slide the monitor stand body in the correct direction down onto the back until it clicks into place.

CAUTION:

Before you begin any of the procedures in this section, follow the

To connect your monitor to the computer:

1. Turn off your computer and disconnect the power cable.

2. Connect the blue display connector cable to the corresponding video port on the back of your computer.

Safety

Instructions.

Table of Contents

E1709w