Plug And Play Capability; Flat Panel Specifications; Resolution Specifications; Electrical Specifications - Dell E1709WFP User Manual

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data
(EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic.
You can select different settings if required.

Flat Panel Specifications

Model number
Screen type
Panel Type
Screen dimensions
Preset display area:
Horizontal
l
Vertical
l
Pixel pitch
Viewing angle:
Horizontal
l
Vertical
l
Luminance output
Contrast ratio
Faceplate coating
Backlight
Response Time
Color Gamut
*Dell E1709W Flat Panel monitor color gamut (typical) is based on CIE 1976 (65%) and CIE1931 (60%) test standards.

Resolution Specifications

Model number
Scan range
Horizontal
l
Vertical
l
Optimal preset resolution
Highest preset resolution

Electrical Specifications

Model number
Video input signals
Synchronization input signals
AC input voltage / frequency / current
Inrush current
Dell E1709W Flat Panel Monitor
Active matrix - TFT LCD
TN
17 inches
(17-inch wide viewable image size)
367.2mm (14.5 inches)
229.5mm (9.04 inches)
0.255mm
160° typical
150° typical
250 CD/m ²(typical)
600 to 1 (typical)
Anti-glare
CCFL edgelight system
8ms typical
65% (typical)*
Dell E1709W Flat Panel Monitor
30 kHz to 83 kHz (automatic)
56 Hz to 75 Hz (automatic)
1440 x 900 at 60 Hz
1440 x 900 at 60 Hz
Dell E1709W Flat Panel Monitor
Analog RGB: 0.7 Volts +/-5%, 75 ohm input
impedance
Separate horizontal and vertical
synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)
120V:30A (Max.)
240V:60A (Max.)