Magnavox MRD500VR Owner's Manual page 14

14 Hookups (cant'd)
oe oQ oJt oo • o• • .e ..1. ...•t.•.
Connecting the System to aTV and a Stereo
VJt_OlU
Back ofTV
(example only)
_yeliow Video Cable
®
red/white
Audio Cables Stereo
Connect the antenna or CableTV signal to the System'sTVANTENNA IN jack.
Connect the red/white audio cables to the System's red/white AUDIO (DVD/VCR OUT)
jacks and to the Stereo's red/white AUDIO IN jacks. Hatch cable colors to jack colors.
4
Connect the yellow video cable to the System'sVIDEO (DVD/VCR OUT) jack and to
the TV'sVIDEO IN jack. To use ComponentVideo cable or S-Video cable instead for the DVD
Player,see pages 12-13.You still need the yellow video cable or RF coaxial cable for VCR features.
Set the P/I PROGRESSIVE switch on the rear of the System to I (Interlace).
You are ready to connect the AM and FM antennas and the Speakers• Go to pages 16-17
to connect these items.
After everything is connected, connect the power cords of the System,TV, and Stereo
to a power outlet.Turn on the'IV and set it to theVideo In channel. Go to your TV's
lowest channel (01 or 02) and change channels downward until you find theVideo In channel.
To find the rightVideo In channel at theTV, turn on the System. Press DVD to put the System in
DVD mode.With no Disc in the Player, a large DVD logo will appear on the'IV screen when you get
' theTV on the correctVideo In channel. ' ......................
If you have not turned on the System already, go to page 19 to complete theVCR's
First-Time Setup. This process sets up the TV channels and the language for theVCR menu.
Set DOLBY DIGITAL to OFF in the DVD Player's Setup menu. Details are on page 72.
Playinga DVD when the settings are wrong could distort the sound or damage the speakers.