Magnavox MRD500VR Owner's Manual page 10

Digital video disc player video cassette recorder am/fm radio tuner
Hide thumbs Also See for MRD500VR:
Table of Contents

Advertisement

10 Hookups
(cont'd)
o.
oetee.l.et
tJ
et
eueet
QeowooeeeemJ
• o
e•lloooteoe_eteoQooe•
co•
•to•o,oe_teee,•e•,,_
,•_o
tt
tee
teeeeeeee
ttette,e•
System
to Cable
Box/Satellite
Receiver
and TV
This connection
will let you use the features
of both
theVCR
and the DVD
Playen
C_IeTV
or Sat_li_ S_r_l
Connect
the Cable TV or Satellite
signal to the System's
TV ANTENNA
IN jack.
Connect
an RF coaxial cable to the System'sTVANTENNA
OUT
jack and to the IN
jack on the Cable Box/Satellite
Receiver,
4
5
6
7
Connect
another
RF coaxial cable to the OUT
jack on the Cable Box/Satellite
Receiver
and to the ANTENNA
IN jack on theTV.
Set the P/I PROGRESSIVE
switch on the rear of the System
to I (Interlace).
You are ready
to connect the AM and FM antennas
and the Speakers.
Go to pages 16-t 7
to connect these items.
When
all connections
are complete,
plug in the power cords of all equipment,
Set the
Cable Box/Satellite
Receiver to channel 3 (the System's default
output
channel). Set the
TV to the
Cable Box/Satellite
Receiver's output
channel (03 or 04).
If you have not turned
on the System
already, go to page t 9 to complete
the VCR's
First-Tilde
Setup. This process sets up the'IV
channels and the language for theVCR menu.
To watch
one channel
while
recording
another
...
1) Put the Cable Box/Satellite Receiveron channel3 (the System'sdefault output channel).(To changeit to
4, press and hold (VCR) PLAYI_ on the front of the Systemfor 3-5 seconds during tape playback.Details
are on page eight.) Set theTV to the Cable Box/Satellite Receiver output channel (03 or 04).
2) PressVCR to put the System in VCR mode.The red VCR light will appear on the front of the System.
3) PressVCRiTV on the remote to chooseVCR position.
4) PressSKIP_/CH
_ or SKIP_/CH
v to select the channel you want to record at the System.
Press REC • or RECORD • to start the recording......
5) PressVCR/TV on the remote once to put the System inTV position.
6) Select the channel you want to watch at the Cable Box/Satellite Receiver.

Advertisement

Table of Contents
loading

Table of Contents