Philips VR1010BP Owner's Manual page 7

Hookups without a Cable Box (cont'd) 7
3
Connect the RF coaxial cable (supplied) to theTV OUT Jack on the back of
theVCR and to the ANTENNA IN Jack on theTV. (You may use either a snap-on
type or screw-on type of coaxial cable, whichever you prefer. A snap-on type is supplied.)
Antenna
or Cable
RF coaxial cable
Antenna In Jack
(on back of TV)
example only
4
Plug in theTV and theVCR.
5
Set the CH3/CH4 switch on the back of theVCR to CH3 or CH4, whichever
channel is not used or least used in your area.To operate yourVCR with your TV, set
the "FV to the same channel. For example, when playing a tape, if the CH3/CH4
switch is set to CH3, the TV should be on channel 3.
CH3/CH4
Switch
CH3 CH4
6
You are ready to turn on the VCR. Please go to pages 10-I I before turning on
the VC R.