Philips VR1010BP Owner's Manual page 55

Multi-Channel Television Sound S ystem 55
oooi_O*_'go*t'_toot0_Q_Oi_o_mo'_joo*oOjlQ_6*_lot_'_0"_ot_i_oO0O_jQg0*BlgoOto_'_o_Iomo_
ThisVCR can receive and record programs broadcast in stereo or
second audio. It can also play back tapes recorded in stereo or
second audio.
• Second Audio You can program yourVCR so you can hear a
program that is being broadcast in second audio or a tape that
was recorded in second audio.A second audio broadcast is usu-
ally a program in a second language.Follow the steps on page 56
to receive or record this type of program.
• Hi-Fi Stereo Playback If a tape is recorded in stereo, you can
program yourVCR to play a tape in Hi-Fi (high fidelity) stereo.
Follow the steps on page 57.
• Hi-Fi Stereo Recording IfaTV program is broadcast in
stereo, you can program yourVCR to receive and record the
program in Hi-Fi stereo.You must program theVCR and make
the appropriate stereo hookups. Followthe steps on page 56.To
playbackthis type of program, follow the steps on page 57.
Receiving a Stereo Broadcast
When a TV program is being broadcast in stereo, STEREO will
appear in the on-screen status display.Youstill have to program
yourVCR to receive and record the stereo broadcast. Followthe
steps on page 56.
_TOP 12:00 AM _
STEREO CH. 10
AUTO
REMAINING
TIME 0:45
SLP 1:23:45 HIFI
J
Receiving a Second Audio Program
If a program is being broadcast in second audio, SAP (Second
Audio Program) will appear in the on-screen status display.Youstill
have to program yourVCR to receive and record the second
audio program. Follow the steps on page 56.
_TOP 12:00 AM _
CH. I0
SAP
AUTO
REMAINING
TIME 0:45
SLP 1:23:45 HIFI
,, J