Philips VR1010BP Owner's Manual page 14

There
are four ways to set the VCR's clock: Manually, with Time
Zone Selection, with Manual PBS Channel Selection, or with
Automatic PBS Channel Selection. Cable Box/DBS users must set
the clock manually. Before you set the clock, make sure:
• TheVCR power is on.
• TheVCR light appears on the display panel. If it does not, press
the VCR/TV button once.
• Channels are set up. Details are on page 12.
• You make each entry within one minute of the previous entry.
To set the clock manually, follow the steps on pages 14-15.To use
Time Zone Selection, go to page 16.To use Manual PBS Channel
Selection, go to page 17.To use Automatic PBS Channel Selection,
go to page 18.
Manual Clock Setting
i
Press theVCR button, then press the MENU button.
_rUNER SET UP
iNITIAL SET UP
TAPE MANAGER
SELECT: &V CONFIRM: OK
END: MENU
J
2
Press the PLAY • or STOP • button to select INITIAL
SET UP, then press the OK/STATUS button.
LANGUAGE ENGLISH
VCR PLUS÷ CH
CABLE BOX
DBS RECEtVER
SELECT': &V CONFIRM:
D MENU
3
Press the PLAY A or STOP • button to select CLOCK,
then press the OK/STATUS button. CABLE BOX USERS SET
CLOCK MANUALLY will appear briefly.
f
DATE 01/01100
AUTO CLOCK ON
PBS CH. AUTO
D ST AUTO
TIME ZONE AUTO
SET &V NEXT:
OK
_D MENU
J
o..... 56©
TIk*E H MUT_ SE *_RCH * IANAC= E_
PHILIPS
JOG,SHTL _ o_n
Helpful Hints
To program the VCR so its clock
will automatically move forward one
hour in April and turn back one hour
in October,see page 19.
To make corrections, follow steps
I-3, then press the OK/STATUSbut-
ton until the item you want to correct
is flashing. Pressthe PLAYA or
STOP• button to enter the correct
information.When you are finished,
press the MENU button.
The menu may appear differently at
step 3 if you are using a Controller
or a Cable Box/DBS.