Philips VR1010BP Owner's Manual page 39

Timer R ecording withtheVCR Plus+ Programming System (cont'd) 3 9
• •••, • •• o. • • .. . •° •• • • • ° o • • ° •
le_oo _.ol t_ol .l_ol _oooo_meoo* mloo* =eo_ _oJ4 t6olloo_*_=loo leoo leoo iol _ oo ol _, • _oo • •
5
Press the OK/STATUS button, If theVCR PLUS+ and CABLE/TV
channel lists appear on the screen, the CABLEFI'V channel has not
been set for theVCR PLUS+ channel of the program you have set in
step 4. Press the Number buttons to enter the CABLE/TV channel
number from your list on page 36, then press the OK/STATUS but-
ton.
• If you want to record the program one time only, go to
step 7. You also may press the Number 8/DAILY or
Number 9/VVEEKLY button repeatedly to select a ONETIME
PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button so that DAILY PROGRAM
appears at the top of the screen. The VCR will record a pro-
gram every day from Monday through Friday, starting at the same
tir_e and recording for the same length of time.
• If you want to record the program every week, press the
Number 9/WEEKLY button so thatWEEKLY PROGRAM
appears at the top of the screen. The VCR will record a pro-
gram on the same day, at the same time, for the same length of
time every week.
fDAILY PROGRAM (MON PRI)
PROGRAM I
CHANNEL ÷/- 12
START +/ 08:00 pM
STOP +/ I0:00 PM
REC SPEED SLP
DAT E ÷/ 06/21/00
WEDNESDAY
DALLY 8 WEEKLY: 9
ONFIRM OK END: TIME
7
Press the ALTISPEED button to select the tape speed. The
selected tape speed, SP or SLP,will appear beside REC SPEED.
8
Press the OK/STATUS or TIMER button. PROGRAMWAS
COMPLETED/PLEASE TURN OFFVCR FOR TIMER RECORDING
should appear on the screen.(If PROGRAM NOT COMPLETED
appears,begin againfrom step I.) After fiveseconds,the on-screen
display will disappear.
9
Press the POWER button to turn off theVCR.TheVCR
must be turned off for a timer recording to take place.
The C) light will appear on the display panel.The (_ light and the
Cassette-Inside light will flash when you turn off theVCR if there is
not a tape in theVCR.
Turn off theVCR for a timer recording!
Put a tape in theVCR.
Leave the Cable Box/DBS on.
_
7-
vo_ _$TATU S
it I
(D C)(D
Helpful Hints
Do not selec¢DALLYat step 6 if the
VCR Plus+ recording you chose is on
a Saturday or Sunday.The recording
will not occur,even though the VCR
may accept the way yau programmed
the recording.
To exit the VCR Plus+ programming
system at any step, press the TIMER
button.
If the timer recording you just pro-
grammed overlaps another timer
recording,PROGRAM NOT COM-
PLETED/PROGRAMOVERLAP will
appear. Details are on page 46.
If you forget to tom off the VCR,
PLEASE TURN OFFVCR FORTIMER
RECORDING flasheson your TV
screen two minutes before a timer
recording is set to begin.To remove
the message,press the CLEARbutton.
To check your timer recordings,see
page 45.
The (_ light will flashif the clock is not
set (if the clock setting was erased
after you set up the timer recording).
Be sure to set the clock before the
timer recording is scheduled to begin.