Philips 36PT8320 Directions For Use Manual page 7

_d
e )*VivaudioA,ideo input jacks areJor NOTE: Repeatedly pressing the AV butlon on the remote control will toggle the
irectpicture and sound connections picture source from the current channel, the AVI channel, then the CVI channel,
between the TV and a VCR (or similar device) then the AV2 channel, then the SIDE (AV3) channel and the AV4 channel. After the
that has audio/video output jacks, fbllow the AV4 channel, the AV button will select the current channel again.
emy steps below to connect your accessory
device to the A V ! Input Jacks located on the
back of the TV. BACKOFTV
1
2
3
4
5
6
Connect the VIDEO (yellow) cable to
the VIDEO AVI in jack on the back of
the TVI
Connect the AUDIO (red and white)
cables to the AUDIO (lefl and right)
AV 1 in jacks on the rear of the TV.
Connect the VIDEO (yellow) cable to
the VIDEO OUT jack on the back of
the VCR.
Connect the AUDIO (red and white)
cables to the AUDIO (lefl and right)
OUT jacks on the rear of the VCR,
Turn the VCR (accessory device) and
the TV ON.
Press the AV button on the remote
control to select the AVI channel, AVI
will appear in the upper left corner on
the TV screen.
With the VCR (or accessory device)
ON and a prerecorded tape (CD, DVD,
etc.) inserted, press the PLAY button
to view the tape on the telexision.
Repeatedly pressing the AV button on the
remote control will toggle the picture source
from the current channel, then AVI, CVI,
AV2, SIDE (AV3), and the AV4 lnpul Jack
connections.
/
_V4 I
SFDE I
-U I
¢tll
AV1
_)®®
@®®®
$*
PHIUPS
BACK OF V(R
@
VIDEO
AUDIO IN
(
AUDIO
VCR
(EQUIPPED \Vr[H VIDEO AND
AUDIO OUTPUT JA(KS)
VIDEO IN
(YELLOW)