Philips 36PT8320 Directions For Use Manual page 46

y)our remote control is capable of working
,our TV and many other devices that
re.spond to #_/?ared remote control commands,
such as VCRs, cable boxes, satellite systems,
and DBS. Your remote may be alread); as is, to
work an accessory device, or you may need to
use one of the methods ("Code Entry" or
"Search ") explained on pages 47 and 48.
f'irst, try this simple test to see !/_vour TV
remote control will give you direct access to
the accessory device ivjhnctions, or i/you will
need to tl_" another method in order to set up
your TV remote control /br that capability,
1
2
Place the TV/VCR/ACC mode
switch in the proper position.
Point the remote control at the remote
sensor window of the accessory device
and press the POWER button,
Does the remote control turn the device
ON?
If YES, stop and try other function buttons on
the remote. If they also work the device, then
the remote is ready and no further steps are
needed.
If NO, go to the next page to try the Code-
Entry method.
it is recommended that you use Philips
brand external accessory devices with your
Philips television to insure proper remote
control functions, if you are using Philips
brand accessory devices, your remote con-
trol should be ready to use with these
devices,
VCR
SLEEP
"rv
AV
vc. @
A_ REC.
ACTIVE
CONTROL CC
SURF PROGRAM
LIST
I
Satellite Receiver
I I
®@
PHILIPS
46