Philips 36PT8320 Directions For Use Manual page 45

A list or series of previously viewed chan-
nels can be selected with the SURF button
on your remote control With thisjeature, you
can easily switch between different TV chan-
nels that currently interest you. The SURF
control allows you to set up to ten channels in
its quick viewing list.
, _1_
Press the CHANNEL( ) or (-) but-
ton (or the numbered buttons) to select
a channel to add to the SURF list.
Press the SURF button on the remote
control, The onscreen display may
read, "SURF LIST EMPTY." The num-
ber of the current channel will be
shown with "ADD?" to the right.
3
While the SURF list message or the
SURF channel list appears on the
screen, press the CURSOR RIGHT
button to add the present channel to
the SURF list,
I f you want to delete the present channel
from the SURF list, press the CURSOR
RIGHT button again.
Repeat steps 1 through 3 to add more chan-
nels (up to 10) to the SURF list,
Along with regularly programmed chan-
nels, the external video source connections
can be added to the SURF list. This means
that the AVI, CVI, AV2, AV3, and AV4
channels can be added to your SURF list.
Just tune m their channel and use the same
procedure described on this page.
SURF
e_ 12 ADD?
SURFUSTEOR b
PHILIPS
SURF
gb 12 DELETE?
SURF 1
12
*_ 24 ADD?
SURF
12
e_ 24 DELEIE?
SURF I
12
24
e_ 32 ADD?
SURF
12
24
q-' 32 DELETE?
your remote also has an A/CH (Alternate
I Channel) button. I ressing this button
wil! toggle b_tween the current and one pre-
vious channel.
Press theA/CH button toggle
between the present channel and the
last previously viewed channel,
®
I
45