Philips 36PT8320 Directions For Use Manual page 48

F_rellOw these simple steps to have your TV
mote search.fbr the code it needs to work
the /hnctions of your accessol T device, Please
read through the steps once b_fbre pe@_rming
them.
NOTE: 771e Search method works only with
devices equipped with channel display indica-
tor.s"or channel di.splay capability:
I Press the POWER button on the
device your are attempting to program
to turn it ON,
Slide the TV/VCR/ACC mode switch
to the VCR position if you're setting
up a VCR or to the ACC position if
you're setting up any other accessory
device,
3
Press the REC(ord)/SAP and
SOUND buttons simultaneously and
hold them down, The device will begin
Io change channels after the remote
identifies the correct code,
When the channels start to change, release the REC(ord)/SAP and
SOUND buttons.
NOTE: Don't let the device scan up more
than five channels. If you do, the remote con-
trol may pass up the correct code, and another
two-minule search cycle will have to be done.
If no channel change happens within two
minules, repeat steps 1_1, Should a channel
change slill not occur, the remote will not
work the desired device,
J,rw
Don't let the device scan up more than five
channels, If you do, the remote may pass up
the right code, and another two-minute
search cycle will have to be done.
if no channel change happens within two
minutes, repeat steps 1 4. Should a channel
change still not occur, the remole control
will not work the desired device.
it is recommended that you use Philips
brand external accessory devices with your
Philips television Io insure proper remote
control functions, if you are using Philips
brand accessory devices, your remote con-
trol should be ready to use with these
devices.
Satellite Receiver
Cable Converter
PHILIPS
48