Advertisement
Available languages
Available languages
Turning Refrigerator On
•
If the refrigerator is off, press COOLING ON/OFF to turn the
cooling on.
•
To turn your refrigerator off, press COOLING ON/OFR Your
refrigerator will not cool when the control is set to Off.
NOTE: Pressing the Cooling On/Off button does not
disconnect
power to the refrigerator. The interior lights will
turn off if either compartment door is open for more than
10 minutes. Simply close and open the door to turn on the
interior lights.
Viewing Set Points
The factory recommended
set points are 0°F (-18°C) for the
freezer and 37°F (3°C) for the refrigerator.
Set point range for the freezer: -6 ° to 6°F (-21 °C to -14°C)
Set point range for the refrigerator: 32 ° to 46°F (0°C to 8°C)
To view the set point temperatures,
press either the up or down
button for the refrigerator or freezer temperature. The display will
become brighter to indicate that you are viewing the set points.
Five seconds after an adjustment is made, the display lights will
dim and return to the actual temperature.
NOTE: During automatic defrost cycles, the actual temperature
displayed may be higher than the set point. This is normal. The
actual temperatures should return to the set points within a few
hours following completion of the defrost cycle.
Adjusting Controls
The mid-settings
indicated in the previous section should be
correct for normal household refrigerator usage. The controls are
set correctly when milk or juice is as cold as you like and when ice
cream is firm.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not blocked.
If you need to adjust temperatures,
use the settings listed in the
chart below as a guide. Wait at least 24 hours between
adjustments.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR too warm
REFRIGERATOR Control
1o lower
FREEZER too warm/too little ice
FREEZER Control
1o lower
REFRIGERATOR too cold
REFRIGERATOR Control
1o higher
FREEZER too cold
FREEZER Control
1o higher
Additional Control Panel Features
Temp Mode
•
Press the °C button to select either Celsius or Fahrenheit
temperature displays.
oC
o
©
Max Cool
Use Max Cool to speed cooling when large grocery loads are
added. Max Cool sets the refrigerator temperature to 34°F (1°C)
and the freezer temperature to -6°F (-21 °C) for 24 hours.
NOTE: While Max Cool is on, the display shows the Max Cool
temperature set points. After 24 hours or when Max Cool is
manually turned off, the set points will be returned to their
previous setting.
•
Press MAX COOL to select this mode. Max Cool will stay on
for 24 hours or until it is manually turned off.
Max Cool
D
©
Holiday Mode
Holiday Mode is designed for the traveler who wishes to save
additional energy or for those whose religious observances
require turning off the lights and ice maker. In Holiday Mode, the
temperature set points remain unchanged, the ice maker and
dispenser levers are disabled, and the interior lights turn off.
•
Press HOLIDAY MODE to turn on the Holiday Mode feature.
This feature will remain on until the Holiday Mode key is
pressed again.
Holiday Mode
©
.... ........
,
,._,_ ....
,.......
The control can be adjusted to properly chill meats or vegetables.
The air inside the pan is cooled to avoid "spot" freezing and can
be set to keep meats at the National Livestock and Meat Board
recommended
storage temperatures
of 28 ° to 32°F (-2 ° to 0°C).
The convertible drawer temperature control is preset to the
PRODUCE setting.
To Store Meat:
Set the control to one of the three MEAT settings to store meat at
its optimal storage temperature.
To Store Vegetables:
Set the control to PRODUCE to store vegetables at their optimal
storage temperatures.
NOTE: If food starts to freeze, move the control to the left (less
cold). Remember to wait 24 hours between adjustments.
Advertisement
