Table of Contents
Advertisement
Example 11: Viewing and adjusting an output volume level
In the following example, the audio output volume is viewed and adjusted. The
steps show the front panel indications that result from your action.
1.
Press and release the Esc button (figure 3-59).
Press the Esc button to clear all selections.
C O N T R O L
ENTER
PRESET
Figure 3-59 — Clear all selections
2.
Press and hold the Audio button for approximately 2 seconds (figure 3-60).
2 seconds
AUDIO
Press and hold the Audio button until it blinks.
= Blinking button
Figure 3-60 — Select Audio mode
3.
Press and release the output 1 button (figure 3-61).
Press and release
1 2 3
the Output 1 button.
The button lights
green.
= Unlit button
Figure 3-61 — Select output 1
VIEW
ESC
The button flashes once.
The input buttons display the selected output's audio volume level.
In this example, the green input buttons indicate 41.5 percent of the applied audio
input. The unlit input buttons indicate an audio volume attenuation of 39 dB.
–39 dB attenuation,
1 2 3 4 5
3
= Slow blinking button
S
MVX Plus 128 VGA A Matrix Switcher • Operation
AUDIO
41.5% volume
INPUTS
6
7
8
9 10
S
= Lit button
11 12
3-39
Advertisement
Table of Contents
