Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION
REQUIREMENTS
E×plosion
Hazard
Keep tammab_e
materials
and vapors,
such as
gasoline,
away from refrigerator.
Failure to do so can result in death, explosion,
or fire.
Your refrigerator operates most efficiently when located in an
area where the temperature
is normally between 15°F (-9°C) and
120°F (49°C).
The refrigerator is equipped with a heater to keep contents from
freezing in cold outside temperatures
below 32°F (0°C) and
above 15°F (-9°C). If the temperature fails below 15°F (-9°C)
remove contents from refrigerator. See "Winterizing."
Dimensions
with Leveling
Legs Installed
251/2 ''
233/4 ''
(64.8 cm)
(60=3 cm)
24"
(61.0cm)
31"
(78.7 cm)
35Vs"
341/2 `'
(89.2
cm)
(87.6 cm)
/
Dimensions
with Casters
Installed
25W'
23%"
(64.8
cm)
(60.3
cm)
31"
(78.7 cm)
24
_
(61.0cm)
Electrical
Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove ground prong,
Do not use an adapter,
Do not use an extension
cord.
Failure to foiow
these instructions can result in death,
fire, or electrical
shock,
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection.
Recommended
grounding
method
A 115 Volt, 60 Hz., AC only 15 ampere electrical supply, properly
grounded in accordance with the National Electrical Code and
local codes and ordinances, is required. Use an outlet that
cannot be turned off by a switch. Do not use an extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the control to the off position and then
disconnect the refrigerator from the electrical source.
When you are finished, reconnect the refrigerator to the electrical
source and reset the control to the desired setting. See "Using
the Control."
Advertisement
Table of Contents
