Table of Contents
Advertisement
Available languages
Available languages
WARNING:
To reduce the risk of fire, electric shock, or injury when using your wine cellar, follow these basic precautions:
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Disconnect power before servicing.
Replace all parts and panels before operating.
Proper Disposal of Your Old Wine Cellar
WARNING
Suffocation Hazard
Remove door from your old wine cellar.
Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned wine cellars are still dangerous
– even if they will sit for "just a few days." If you are getting rid of
your old wine cellar, please follow these instructions to help
prevent accidents.
Tools and Parts
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Hand drill or electric drill
(properly grounded)
⁷⁄₆₄" Drill bit
⁵⁄₁₆" Drill bit
Chamfer bit
#16 Drill bit
⁷⁄₆₄" Allen wrench
PARTS NEEDED:
Custom Overlay Frame—See "Overlay Frame Dimensions."
Hardware (Optional)
PARTS SUPPLIED:
Pivot plate (top)
8 mm nylon insert (2)
#6 x 1" Pan-head
screws (10)
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTALLATION REQUIREMENTS
Phillips screwdriver
Flat-blade screwdriver
Scissors
Masking tape
Tape measure
Petroleum jelly
#6 x ¹⁄₂" Flat-head
screws (2)
0.093 x ³⁄₄" x 8 ft foam
tape
Remove doors from your old wine cellar.
Use nonflammable cleaner.
Keep flammable materials and vapors, such as gasoline,
away from wine cellar.
Use two or more people to move and install wine cellar.
Before you throw away your old wine cellar:
Take off the door.
Leave the racks in place so that children may not easily climb
inside.
Custom Overlay Frame
If you plan to install a custom overlay frame, you will need to
create the frame yourself or consult a qualified cabinetmaker or
carpenter. See "Overlay Frame Dimensions" for frame
specifications in creating your overlay frame.
IMPORTANT:
The thickness of the overlay frame must be ³⁄₄" (1.91 cm).
Overlay frame must not weigh more than 20 lbs. (9.07 kg).
Overlay frames weighing more than recommended may
cause damage to your wine cellar.
Before creating the custom overlay frame, determine the
direction you want the door to swing. Custom overlay
frames are hinge specific. A frame that is created for a
right-hinge door swing cannot be used for a left-hinge
door swing.
3
Advertisement
Table of Contents
