Table of Contents
Advertisement
Available languages
Available languages
REFRIGERATOR USE
Your new refrigerator may make sounds that your old one didn't
make. Because the sounds are new to you, you might be
concerned about them. Most of the new sounds are normal.Hard
surfaces, such as the flooring and surrounding structures,
can
make the sounds seem louder. The following describes the kinds
of sounds and what may be making them.
•
Your refrigerator is designed to run more efficiently to keep
your food items at the desired temperatures
and to minimize
energy usage. The high efficiency compressor and fans may
cause your refrigerator to run longer than your old one. You
may also hear a pulsating or high-pitched
sound from the
compressor or fans adjusting to optimize performance.
•
The evaporator fan runs continuously. This defrosts the
evaporator, keeps a constant temperature inside the
refrigerator and make the refrigerator more energy efficient.
•
Rattling noises may come from the flow of refrigerant or items
stored inside the refrigerator.
•
As each cycle ends, you may hear a gurgling sound due to
the refrigerant flowing in your refrigerator.
•
You may hear water running into the drain pan when the
refrigerator is defrosting.
•
You may hear clicking sounds when the refrigerator starts or
stops running.
Adjusting Controls
The mid-setting
indicated in the previous section should be
correct for normal usage. The control is set correctly when
beverages are as cold as you like.
If you need to adjust the temperature,
wait at least 24 hours
between adjustments
and then recheck the temperature.
To make the refrigerator colder, adjust the control to the next
higher setting. To make the refrigerator less cold, adjust the
control to the next lower setting.
REFRIGERATOR FEATURES
Your outdoor refrigerator has two adjustable shelves. The upper
shelf will fit in either of the two upper positions in the refrigerator.
The lower shelf will fit in either of the two lower positions in the
refrigerator.
To install shelves:
1. Remove the shelf by lifting the entire shelf slightly and move it
all the way to one side. Tilt the other side up and out of the
shelf supports.
2. Replace the shelf by inserting one end all the way into the
center of the shelf supports. Then, lower the other end of the
shelf and insert it into the shelf supports.
NOTE: The shelf should lower slightly and lock into place. If the
shelf does not appear stable, make sure both ends of the shelf
are inserted into the shelf supports.
For your convenience,
your refrigerator control is preset at the
factory. When you first install your refrigerator, make sure that the
control is still preset to the mid-setting.
I
To turn your refrigerator off, turn the refrigerator control to the off
position.
NOTE: Your product will not cool when the refrigerator control is
in the off position.
I
Advertisement
Table of Contents
