Download  Print this page

KitchenAid A-9 Instructions Manual page 14

Coffee mill
Hide thumbs

Advertisement

Care and Maintenance
Repladng
the Cutting
Burrs
If the cutting burrs are damaged, or
have reached the end of their life
(usually after grinding 600-800 Ibs. of
coffee), they can be easily replaced.
Contact KitchenAid at
1-800-541-6390
to order a set of
replacement burrs.
To replace the burrs:
1. Unplug Coffee Mill.
2. Remove the grind-adjustment ring
and burr-shaft assembly. For
instructions, see "Cleaning the
Cutting Burrs", pages 10-11,
steps 1-5.
3. With a Phillips-head screwdriver,
remove the burr from the burr-
shaft assembly by turning the two
burr-mounting screws counter-
clockwise until free.
4. Remove the burr from the grind-
adjustment ring by turning the
two burr mounting screws counter-
clockwise until free.
4. Attach the replacement burrs to
the burr-shaft assembly and the
grind-adjustment ring with the
burr-mounting screws. Make
certain the cutting surfaces of the
burrs face outward (see the
illustration above), and the burr-
mounting screws are tight.
5. Insert the burr-shaft assembly into
the motor housing and attach the
grind-adjustment ring. For
instructions, see "To reassemble",
page 11, steps 1-3.
12

Advertisement

Table of Contents
loading

  Related Manuals for KitchenAid A-9