Work Bowl Assembly - KitchenAid KFP740 Instructions And Recipes Manual

Food Processor Features
Work Bowl Cover
with Tall Feed Tube
Feedtube accommodates long food items
with a minimum of sectioning. Unlike
extra-wide feed tubes, there is no pusher
interlock system, so the entire length of
the tube can be filled with food.
Food Pusher
Pusher moves food through the tall feed
tube smoothly and easily. The pusher can
also be used as a convenient 8 oz.
(235 mL) measuring cup.
9-Cup (2 L) Work Bowl
The tough polycarbonate bowl provides
capacity for large jobs.
Mini Bowl and Mini Blade
4-cup (945 mL) bowl and stainless steel
blade are perfect for small chopping and
mixing jobs.
Fine (2 ram) Slicing Disc
Disc produces approximately _/6-inch
(2 mm) slices of most foods, from delicate
strawberries to partially frozen meats.
Medium (4 mm) Shredding Disc
Disc produces approximately _A-inch
(4 mm) shreds of most firm fruits,
vegetables, and cheese.
Disc Stem
Stem fits over the power shaft on the
base and into the bottom of a slicing or
shredding disc.
Stainless Steel
Multipurpose Blade
Versatile blade chops, minces, blends,
mixes, and emulsifies in a matter
of seconds.
Dough Blade
The dough blade is specially designed for
mixing and kneading yeast dough.
Heavy-Duty Base
The base features the off, on, and pulse
buttons along with the power shaft,
which rotates the blades and discs.
Spatula/Cleaning Tool
Special shape facilitates food removal
from bowls, discs, and blades.
Preparing the Food Processor for Use
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
2. With the handle just to the left of
center, place the work bowl on the
base, fitting the center opening over
the power shaft.
3. Grasp the work bowl handle and turn
the bowl to the right until it locks into
position.
Before First Use
Before using your Food Processor for the
first time, wash the work bowl, work
bowl cover, mini bowl, feed tube pusher,
discs, and blades either by hand or in
the dishwasher (see "Cleaning the Food
Processor" on page 12).
Work Bowl Assembly
1,
Place the Food Processor base on a
dry, level countertop with the controls
facing forward. Do not plug in the unit
until it is completely assembled.