Preparing The Food Processor For Use; Before First Use; Work Bowl Assembly - KitchenAid KFPM770 Instructions Manual

Preparing the Food Processor for Use

WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.

Before First Use

Before using your Food Processor for the
first time, wash the work bowl, work
bowl cover, chef's bowl, mini bowl, feed
tube pushers, discs, and blades either by
hand or in the dishwasher (see "Cleaning
the Food Processor" on page 16).

Work Bowl Assembly

1. Place the Food Processor base on a
dry, level countertop with the controls
facing forward. Do not plug in the
unit until it is completely assembled.
2. With the handle just to the left of
center, place the work bowl on the
base, fitting the center opening over
the power shaft.
3. Grasp the work bowl handle and turn
the bowl to the right until it locks into
position.
4. Insert the desired accessory into
the work bowl. See pages 9–12 for
accessory instructions.
5. Place the work bowl cover on the work
bowl with the feed tube just to the
left of the work bowl handle. Grasp
the feed tube and turn the cover to
the right until it locks into place.
NOTE: To avoid damage to the work
bowl, do not attach the cover to the work
bowl before the work bowl is locked on
the base.
8