Advertisement
Available languages
Available languages
.
2.
Remove all components from the carton.
Attach the Motor Bracket on the outside of the left grill bowl panel.
Align the two holes of the Bracket
with the holes on the grill bowl. Tighten securely using two Screws #10-24x3/4"
UNC, Plain Washers
and Nuts provided.
Washer 3/16"
#10-24 Nut
[ 1111111111111111111
Rot. Screw #10-24x3/4"
UNC x2
©
Rot. Washer
3/16" x2
Motor
Bracket
.
Rot. Nut #10-24 x2
Rot,
Screw#10-24x3/4"
UNC
with
washers
and
nuts
Outside
of left grill
bowl
panel
Slide a Holding Fork onto each end of the Rotisserie Spit. Adjust spacing between Holding Forks to
accommodate
your food, then tighten the Thumbscrews
to keep the Holding Forks in position. Slide
the Collar and Bushing onto the threaded end of the Spit. Do not tighten the Collar Thumbscrew
until
the Rotisserie
is placed into your grill.
Thumbscrew
#10x1/2"
Rot.Thumbscrew
Spit
Bushing
1/4"xl/2"
x2
Holding
Forks
Collar
Rot.Thumbscrew
#10xl/2"
xl
Thumbscrew
#1/4"x1/2"
19
Advertisement
