Download Print this page

Kenmore ELITE 141.16674800 Use And Care Manual page 16

Liquid propane gas (lpg) & natural gas (ng) grill

Advertisement

Available languages

Available languages

Grill
Lighting
Instructions
1. Before
each
use, check
all hoses
for cracks,
nicks,
cuts,
burns
or abrasions.
If a hose
is damaged
in any way, do
not use your
grill before
replacing
the hose with an
authorized
part from
the Parts
List. Also
make
sure
all
gas
supply
connections
are securely
tightened.
2. Familiarize
yourself
with
the safety
and Use and Care
instructions
in this Guide.
Do not smoke
while
lighting
grill or checking
gas supply
connections.
3. Be sure the LP Gas tank
is filled.
4.
Open
the Grill Lid.
6.
Failure
to replace
a faulty
hose,
secure
gas
supply
connections
or to open
the
Lid
before
proceeding
to the
Lighting
Procedures
could
result
in a fire
or
explosion
that
could
cause
serious
bodily
injury,
death,
or
property
damage.
5. Set Control
Knobs
to OFF and open
the LP Gas tank
valve
SLOWLY
1/4 of a turn.
For Natural
Gas open the
Shut Off Valve at source.
OFF
Open
LP
Gas
tank
Push and turn the LEFT
Control
Knob to._l,. Push the
Control
Knob
in to automatically
ignite the Burner.
Once the burner
is lit, turn the knob
back to Hi.
I
Low_
OFF
?
t ?-t
Main
Rotisserie
Infrared
Burner
Burner
Burner
7. If ignition
does not occur
in 5 seconds,
turn gas off at
source
and turn Control
Knobs
OFF. Wait
at least 5
minutes
for gas to clear, then
retry.
If your
grill still fails to
light turn the burner
Control
Knob(s)
and gas source
OFF
and conduct
a leak test of ALL
gas connections
and gas
sources
as explained
in the Use and Care section
of this
guide.
If no leaks are detected,
wait 5 minutes
for any
gas to clear and repeat
the lighting
procedure.
Rotisserie
Burner
Lighting
Instructions
1. Follow
steps
1 through
5 of the Grill Lighting
Instructions.
2. Push and turn the Control
Knob to_'
. Push the
Control
Knob
in to automatically
ignite the Burner.
Once the burner
is lit, turn the knob
back to Hi, keep
pressing
the knob
and holding
it for at least 10
seconds
before
releasing.
3. If ignition
does
not occur
in 5 seconds,
turn gas off
at source
and turn Control
Knobs
OFF. Wait at least
5 minutes
for gas to clear,
then retry.
If your grill still
fails to light turn the Control
Knob(s)
and gas source
OFF and conduct
a leak test as explained
in the Use
and Care section
of this guide.
If no leaks
are
detected,
wait 5 minutes
for any gas to clear and
repeat
the lighting
procedure.
4. After Burner
is lit, turn the tank valve SLOWLY
one
more 1/4 of a turn.
IMPORTANT:
Do not use the Rotisserie
Burner
and Main
Burners
at the same
time.
Rotisserie
burner
is for Rotis-
serie
Cooking
only.
ROTISSERIE BURNER
INFRARED BURNER
KNOB:
I
KNOB:
I
÷
+
Infrared
Burner
Lighting
Instructions
1.
Follow
steps
1 through
3 of the Grill Lighting
Instructions.
2.
Open
Infrared
Burner
Lid.
3.
Set Control
Knobs
to OFF and open
the LP gas
tank
valve SLOWLY
1/4 of a turn.
For Natural
Gas
open
the Shut
Off Valve
at source.
4.
Push and turn the Control
Knob
to _'. Push the Con-
trol Knob
in to automatically
ignite
the Burner.Once
the burner
is lit, turn the knob
back to Hi.
5.
If ignition
does
not occur
in 5 seconds,
turn gas off
at source
and turn Control
Knobs
OFF. Wait at least
5 minutes
for gas to clear, then
retry.
If your grill still
fails to light turn the burner
Control
Knob(s)
and
gas source
OFF and conduct
a leak test as ex-
plained
in the Use and Care section
of this guide.
If
no leaks are detected,
wait 5 minutes
for any gas to
clear
and repeat
the lighting
procedure.
6.
After Burner
is lit, turn the tank valve SLOWLY
one
more 1/4 of a turn for 1/2 of one complete
turn.
Manually Lighting
Your
Grill
By Paper
Match
To light your gas grill by match,
insert a match
into the
Lighting
Stick
and follow
steps 1 through
5 of the Grill
Lighting
Instructions.
Then,
light the match
and place
Lighting
Stick through
the Lighting
Hole on the left side
of the grill as shown
below.
Turn
the nearest
Control
Knob
to the Hi setting
to release gas. The Burner
should
light
immediately.
8. After one Burner
is lit, turn the tank valve SLOWLY
one
more 1/4 of a turn.
9. Turn
other
burners
to Hi to light as you move towards
the
fuel
source.
Lighting Hole
Match
Lighting
16

Advertisement

loading

This manual is also suitable for:

Elite 141.17674800141.16674800141.17674800