Washer Operating Instructions
Laundry Center Gas Model 90872
Laundry Center Electric Models 90812/90817
Before Operating Your Washer
Read your Owner's Guide. It has important safety
and warranty information. It also has many
suggestions for best washing results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
in your Owner's Guide
before operating this appliance.
Read Washing Procedures
in your Owner's
Guide. It explains these operating steps in detail.
1. Sort laundry
into loads that can be washed
2. Prepare items forwashing.
3. Pretreat stains and heavy soil.
4. Add the measured amount of detergent to
Printed in U.S.A.
5. If desired, add liquid bleach to Bleach
6. Add laundry load to wash tub.
7. If desired, add liquid fabric softener to Fabric
8. Set cycle selector and washer controls
according to type, size, and soil level of each
9. Close lid and pull cycle selector knob to start
10. Remove items at end of cycle. Wait about 1
minute for safety lid lock to release.
Always follow instructions on fabric care labels.
The Regular, Perm Press and Delicates cycles
provide a spray rinse during the first spin, followed
by a deep rinse and final spin.
This cycle provides up to 15 minutes of normal wash
agitation followed by a fast spin for most fabrics.
Extra Rinse Cycle
Use the Extra Rinse cycle after a complete wash
cycle when an additional rinse is desired. It provides
3 minutes of rinse agitation, followed by a spin at the
selected wash water temperature.
Select extra rinse by pushing in the cycle selector
knob and turning it clockwise to Extra Rinse. Pull
out knob to start.
Perm Press Cycle
This cycle provides up to 12 minutes of normal wash
agitation followed by a fast spin for cottons and
blends with a no-iron finish.
This cycle provides 6 minutes of gentle wash
agitation followed by a slow spin for knit and delicate
(continued, reverse side)
PIN 131877900 (9907)