Advertisement
REMOVABL
OVEN
RACKS
Be carefu!
not to scratch
the oven finish
when
installing
or removing
oven racks,
To install:
1. Set the raised back edgeofthe
rack on apair of rack
guides.
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack and push the rack
all the way in.
To remove:
1. Pull the oven rack out, then up.
Some models have one standard oven rack and one
folding oven rack.
The folding
rack can be easity stored away when not in
use.
NOTE:
BUMP tN
RACK GUIDE
NOTE:
"_"
The racks
are designed
with
stop necks,
When
the racks
are pBaced cerrecUy
on the rack
sup-
po_L and extended
from the oven,
the stop lock
prevents
the
racks
from
tilting
when
you are
removing
food from
the racks
or pRacing food on
them,
For best pe_ormance
remove
oven racks during a clean cycle.
If oven racks
are left in the range during
a self-cleaning
cycle,
they
win darken,
lose
their
luster
and become
hard to s!ide.
tf you choose
to leave
the racks
in the oven, you can polish the edges of the racks
with steel
wool and
apply
a smal!
amount
of vegetable
oil to the rack
edges
after
the self-clean
cycle.
REMOVABLE
OVEN
DOOR
TO Ye_ove:
1. Open the door to the stop position (see illustration)°
2. Grasp the door at each side and lift up and off the
hinges.
NOTE:
When the door is removed
and hinge arms
are at stop position,
do not bump or try to move
the
hinge
arms.
The
hinges
couJd
snap
back
causing
an injuw
to the
hands or damage
to the
porcelain
on tthe front
of the
range,
Cover
the
hinges
with toweling
or empty
towel
rolls
while
working
in the oven area,
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The
hinge
arms
must
st!l!
be
in the
stop
position.
2, Slide the door down onto the hinges as far as it will
go and close the door.
STOP (BROIL) POSITION
HINGE
RI MOVABLE
STORAGE
E)RAWe:R
This
drawer
gives
you
space
_or
keeping
cookwareand
bakeware,
Plastics
and flammable
material
shougd not be kept
in this
drawer,
Do not overload the storage drawer. If the drawer is too
heavy, it may slip off the track when opened. To open the
drawer, grasp the center of the handle and pull straight
out.
To remove:
Pull drawer straight
out and lift over the
guide stops,
To replace:
Lift over the guide stops and slide drawer
into place.
19
,IF//
stop
NEMNT38-1
Advertisement
