Advertisement
LF- LEAH
CYCLE
BEFORE A CLEAN CYCLE
1o Removethebroil
pan and grid, oven racks,all utensils
and any foil that may be in the oven.
Do not try to
clean utensils or any other objects in the oven during
a self-clean cycle.
If oven racks
are left
in the
range
during
a clean
cycle,
they
wii! darken,
lose their
Uuster and become
hard to slide,
If
you choose to leave the racks in the oven, you can
polish the edges of the racks with steel wool and
apply a small amount of vegetable
oil to the rack
edges after the self-clean cycle.
This will make the
racks easier to slide.
2_ Soil on the oven front frame, under the front edge of
the cooktop, the door liner outside the door gasket
and the front edge of the oven cavity (about I" into the
oven) will not be cleaned during
a clean cycle (see
illustration below)_ Clean these areas by hand before
starting a clean cycle.
Use hot water with a soap-filled steel wool pad. We
recommend a cleanser such as 'Soft Scrub®' brand
or a similar cleaning product to keep white surfaces
looking clean and new. After cleaning, rinse well with
a vinegar and water mixture° This will help prevent a
brown residue from forming when the oven is heated.
Buff these areas dry with a dry cloth.
FRONT FRAME
DOOR
DOOR LINER
AFTER
A CLEAN
CYCLE
After a clean cycle, you may notice some white ash in the
oven. Just wipe it up with a damp cloth,
tf white spots remain, remove them with a soap4illed
steel wool pad_
Be sure to rinse thoroughly
with a
vinegar and water mixture. These deposits are usually
a salt residue that cannot be removed by the clean cycle.
if the oven is not clean after one clean cycle, the cycle
may be repeated.
QUESTIONS
AND
AHSWERS
Q. If my electronic control is not working,
can I still self-
clean my oven?
Am NooYour RANGE CONTROL is used to program the
oven to start and stop the self-cleaning cycle.
O. Can I use commercial oven cleaners on any part of
my self-cleaning oven?
A. No cleaners or coatings should be used on or around
any part of this oven.
Qo Can I clean the woven gasket around the oven door?
A, You cannot clean the woven gasket.
Q. Is it normal to hear "crackling
sound"
during clean-
ing?
Ao Yes° This is the metal heating and cooling.
Q. Why do I have ash left in my oven after cleaning?
A Some types of soil will leave a deposit,
tt can be
removed with a damp sponge or cloth.
Q.
Ao
What should t do if excessive
smoking
occurs during
cleaning?
This is caused by excessive
soil and you should
press CLEAR/OFF.
Open windows to rid room of
smoke. Allow the oven to cool for at least one hour
before opening the door_ Wipe up excess soil and
reset the clean cycle.
a_
A.
Should there be any odor during the cleaning?
Yes, there may be an odor during the first
few
cleanings.
Failure to wipe out excessive soil might
also cause an odor when cleaning.
3. Wipe up heavy spiliovers on the oven bottom.
Too
much soil may cause smoking during the clean cycle.
4. Do not rub the door gasket. The fiberglass
material
of the gasket has an extremely
low resistance to
abrasion. An intact and well fitting oven door gasket
is essential for energy efficient oven operation and
good baking results, if you notice the gasket becoming
worn, frayed
or damaged
in any way or if it has
become displaced on the door, you should replace
the sealo
14
NESCLO3-3
Advertisement
