Advertisement
DELaYeD
AND
OFF:
You can set the oven to turn on and off automatically_
The control will calculate the time to start cooking.
2_
Press COOK
TIME.
Press the UP or DOWN arrow to set how long you
want to bake.
3. Press STOP
TaME
The earliest stop time you can
set wi{! appear in the display.
4. Set STCrP T_JiE (the time of day when you want the
oven to turn OFF) by pressing the UP or DOWN
arrow.
5. Press E_Eo
6. Select temperature
by pressing the UP or DOWN
arrow. See Fig. 8.
Fig. 8
®
INCREASE
OR DECREASE TIME
INCREASE OR DECREASE
TO SET STOPTIME
INCREASE OR DECREASE
TO SETTEMPERATURE
NOTE:
If the control beeps, you have not completed your timed
oven setting.
Press CLEAR/OFF
and start again with
Step 1o
Never
tEet food,
such
as
dairy
products,
fish, meat,
poultry,
etc.
sit _or more
than
t
hour
bef_ore
cooking
sta_s
when
you set your
oven
for
a dellay
start.
Room
temperature
promotes
the growth
of hat.u!
bacteria.
Be sure the
oven light
is off because
heat from
the bu{b wil! speed bacteria
growth.
DmSPLAY:
Once you have programmed
your control
for any
operation, you can display the setting by pressing the
appropriate
pad.
For example,
if you are using the
TSP_ER and want to see the time of day, press CLOCK.
The display will show the time of day.
NOTe_:
You cannot set BAKE, BROIL or COOK TIME
while the oven door is in the locked posltion_ If
you try,, the word "door"
will appear in the
display.
The oven door lock Is to be used for
Self-Cleaning
only.
TONES:
The end-of-cycle
tone will sound at the end of timer use
and automatic oven functions.
The end-of-cycle tone is
3 short beeps followed
by 1 beep every 6 seconds that
repeat until you press any operation.
If you would like
to eliminate the repeating beeps, push and hold CLEAR/
OFF for ten seconds.
To return the 1 beep every 6
seconds, push and hold CLEAR/OFF
for 10 seconds.
To cancel the end-of-cycle tone, press any key except
the UP or DOWN arrow key.
The
Bow temperature
zone
of this
range
(between
t 50°F and 200°F)
is
availlable
to keep hot cooked
_oods
warm.
Food kept
gonger
than
two
hours
at
these
low
temperatures
may
spoil
If the time display beeps continuously
and flashes an
"F" followed
by a number, you have a function error
code.
Note the number after the "F".
Press CLEAR/
OFF. Allow oven to cool for i hour_ If problem repeats,
disconnect all power to the range and call for service.
Advise your service technician of the number following
the "F" in the display.
9
NCCTLI7-1
Advertisement
