Table of Contents
Advertisement
Control Pad Functions
CLEAR PAD-- Used to
clear any function
previously entered
except the time of day
and minute timer. Push
CLEAR to stop cooking.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactoryuse of your oven, become familiar with the various functions
of the oven as described below.
UP and DOWN ARROW PADS-- Used along with the
function pads to select oven temperature, cooking
time, stop time (when programming an automatic stop
CLOCK PAD-- Used
set the time of day.
time), time of day, clean time and minute timer.
BAKE PAD--Used to
enter the normal
baking mode
"___
temperature.
INDICATOR
LIGHTS-- These
light to show which
feature is in use.
BAKE TIME PAD--
Used to enter the
length of the baking
time.
Used to select the
self-cleaning
cycle.
The oven
can
• Bake normally
• Time bake
• Broil
• Self-clean
OVEN, PREHEAT & LOCK LIGHTS--- The "OVEN" light
will glow each time the oven unit turns on to maintain the
set oven temperature. The "PREHEAT" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven
temperature. The "LOCK" light will flash until the door
locks when the self-clean cycle is in use. It glows
constantly after the door locks.
be programmed
to:
TIMER PAD_
Used to set or
cancel the minute
timer. The minute
timer does not
start or stop
cooking.
TIME PAD--
Used to set the
rll
desired stop time for
Z
baking. Can be
_'_
used with BAKE
,-r-
TIME to program a
01
delayed bake cycle.
-r-
For a silent
control
panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controlscan be programmed
for silent operation. Push and hold [].
After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pushed. To return the sound, push and hold []
again for 7 seconds until 1 beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature
conversion:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory, The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1.
Push [_.
"------"
appears in the display.
2.
Push and hold the []
until "HI" appears in the display.
3.
Push and hold {_)
until °F or °C appears in the display.
4.
Push the []
or [_)
to change °F to °C or °C to °F.
5.
Push any function pad to return to normal operating mode.
Advertisement
Table of Contents
