Table of Contents
Advertisement
Oven Cleaning
(continued)
@®
Q
@
Use care when opening
the oven door after the self-cleaning
cycle. Stand to the side of the oven
when opening the door to allow hot air
or steam to escape.
DO NOT force the oven
door open. This can damage the
automatic door locking system. Use
caution when opening the door after
the self-cleaning cycle is completed.
The oven may still be VERY HOT.
To Start
the Self-Clean
Cycle
*We recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle
for average to heavy soils (to assure satisfactory results).
To Set the Controls for a Self-Clean Cycle:
1.
Be sure the clock shows the correct time of day.
c_.,
"appears in the display.
2.
Push
3.
Push the {_
until "3:00" appears in the display for a 3 hour cycle, or
push the _)
until "2:00" appears in the display for a 2 hour cycle.
4.
As soon as the _
or L_I
is released, "CLn" appears in the display.
5.
As soon as the controls are set, the motor driven lock will begin to close
automatically and the "LOCK" indicator light will flash. DO NOT open the
door while the light is flashing (it takes about 15 seconds for the lock to
close).
6.
The "LOCK" light will glow until the cleaning cycle is completed or
cancelled, and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. The time of day will appear in the display window and the "LOCK" light will
continue to glow.
2.
Once the oven has cooled down for about 1 HOUR and the "LOCK" light
has gone out, the oven door can be opened.
Stopping or Interrupting
a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to
excessive smoke or fire:
1.
Push CLEAR.
2.
Once the oven has cooled down for about 1 HOUR and the "LOCK" light
has gone out, the oven door can be opened.
3.
Correct the condition which caused the smoking.
4.
Restart the self-clean cycle once all conditions have been corrected.
16
Advertisement
Table of Contents
