Changing The Needle; Setting The Needle Thread Tension; Lowering The Feed Dog - Pfaff creative 7560 Instruction Book

Changing the needle
Switch off the master switch.
To remove: Lower the sewing foot and set the
needle at its highest point. Now loosen the
retaining screw (25) and pull the needle
downwards.
To insert: The flat side (A) of the needle must
face to the rear. Lower the sewing foot and insert
the needle, pushing it up as far as it goes. Hold
the needle and tighten the retaining screw (25)
firmly.
:
Setting the needle thread tension
Set the required needle thread tension with the
help of the marking B.
The normal setting for sewing is 4 to 5, For
embroidering and buttonhole sewing it is
between 2 and 3.
Lowering the feed dog
For certain sewing work, e.g. darning, the feed
dog (54) has to be dropped. To do this, open the
hook cover (49) and press slide (C) fully to the
right. Now the feed dog is dropped.
—A
27