Programmable Seam Length For Straight Stitch - Pfaff creative 7560 Instruction Book

Programmable seam length for straight stitch
If you wish to join several workpieces of the same
size you can enter the seam length with straight
stitch. The advantage is that you can repeat the
seam with the same length as often as you want
to. The machine will sew a tack at the seam start
and seam end and then stop automatically. After
switching on the machine the basic menu
appears on the screen with straight stitch
highlighted.Then press key 1 or"o.k.' the
straight stitch is shown with its length settings.
On the right of the screen "pat" is displayed. Now
press the cursor key
—,
the additional message
"prog" will appear.
Now the seam length can be programmed. To do
this, press the foot control, the machine will sew
a few stitches for a tack at the seam start and will
then continue sewing.
When the desired seam length has been reached,
press the reverse key. The machine will sew a
tack and then stop automatically.
The message "auto" for automatic function
appears in the display indicating that the desired
seam length is now programmed and can be
repeated as often as you wish.
If you want to interrupt this limited seam length
to sew longer seams in between, press cursor
key
The "auto" message disappears; longer seams
can be sewn.
If you wish to return to the limited seam length,
press cursor key
again. The message "auto"
reappears in the display and you can continue to
sew with the programmed straight stitch.
When changing the program or switching off the
machine the programmed length is lost.
p
I
-
,—
I
35