Programmable Seam Length For Straight Stitch - Pfaff creative 7570 Instruction Book

J
Programmable seam length for straight stitch
j
If you wish to join several workpieces of the same
J
size you can enter the seam length with straight
stitch.The advantage is that you can repeat the
seam with the same length as often as you want
J
to.The machine will sew a tack at the seam start
and seam end and then stop automatically.
j
After switching on the machine the basic menu
j
appears on the screen with straight stitch high
lighted. Then press key 1 or "o.k.' the straight
J
J
j
I
I
The message "auto" for automatical appears in
the display indicating that the desired seam
length is now programmed and can be repeated
as often as you wish.
If you want to interrupt this limited seam length
to sew longer seams inbetween, press cursor
key (8)
—.
The "auto" message disappears; longer seams
can be sewn.
stitch is shown with its length settings. On the
right of the screen "pat" is displayed. Now press
the cursor key (8)
—',
the additional message
"prog" will appear. Now the seam length can be
programmed.To this end actuate the foot control,
the machine will sew a few stitches for a tack at
the seam start and then continue sewing. When
the desired seam length has been reached, press
the backwards key. The machine will sew a tack
and then stop automatically.
If you wish to return to the limited seam length,
press cursor key
—*
(8) again.The message "auto"
reappears in the display and you can continue to
sew with the programmed straight stitch.
When changing the program or switching off the
machine the programmed length is lost.
11
2
[3 4) 56 7
9
-ii
;a
___
1
2 {3
'
fa
1i
g
I
i
1 ii I
ii I
47