Storing Only Adjusted Tension Settings; Adjusting The Tension Without Storing - Pfaff coverlock 4872 Instruction Manual

Changin g and storing the stitch length,
different ial feed and tension settings
Activate the desired program using the
program selection keys
+
and
—.
Press the
memory selection key P until the memorie s
A, B or C appear on the display. By pressing
the memory key M, the stitch length display
will flash. Using the program selection key
+,
the stitch length can be changed . Using
the program selection key—, the different ial
feed display will be activated and the
different ial feed can be changed using the
program selection key
÷.
The tension set
tings can be adjusted in incremen ts of two
using the tension keys
±
and
—.
The adjusted
settings can be stored using the memory
key M.
Prog
—- -.
Select the desired memory using the
memory selection key P. Change the tension
and press the memory key M twice.
If you would like to adjust the tension e.g.
whilst sewing, without having to store this
adjustme nt, simply press one of the
tension keys
+
or—. All tensions can now be
adjusted as desired.
Prog
4
Storing only adjusted tension settings
Adjustin g the tension without storing
43