Threading; Threading/Guide Wires - Pfaff hobbylock 4762 Instruction Manual

A colour-coded threading diagram for
quick reference is to be found behind the
looper cover, i.e. inside the machine.
Thread the individual threads
—
as shown
—
following steps ito 4.
Place the thread spools on thread spool
stands
25.
Use cone adapters 26 only
with conical spools. Further notes on the
thread spool net and thread unreeling disc
are to be found on page
10.
Insert the
threads through the guide wires 20 from
back to front according to the colour
coding.
3 Faden
linke rechte
Nadel Nadel
The colour markings are applicable as fol
lows:
1. Right overedge looper
=
red
2. Left overedge looper
=
yellow
3. Right needle
=
green
4. Left needle
=
blue
Lift carrying handle 3. Insert the threads
beneath the handle and through rear gui
des 33 by pulling down with both hands
until the yarn slips under the guide wire.
Now pull the thread between the tension
discs and press it down until it is lodged
between the latter. Return the carrying
handle to its closed position.
4 Faden
Threading
H
I
Threading/guide wires
12