Important Notes On Threading; Thread Reel Change On Threaded Machine - Pfaff hobbylock 4762 Instruction Manual

The needle threads must always be inser
ted last in order to avoid mistakes with
the left looper thread and thread breakage
or missed stitches.
Cut the threads close to the thread spool and set the new thread reels in place. Tie
together the threads still in the machine and the new threads, and pull the threads out
of the needles. Set all the thread tensions to —5. Now pull on the needle threads until
the knots are about 15 cm past the last thread guide before the needles. Cut the knots
off and pull the threads through the respective needle eyes. The looper threads can be
pulled continuously past the looper eye and laid to the left underneath the sewing foot.
Important note on threading:
The thread must also be removed from
the needle(s) if the looper threads break.
Re-insert the looper thread first, then
re-thread the needle(s).
Thread reel change on threaded machine
18