Mounting The Converter; Switch Off At The Mains Switch - Pfaff hobbylock 4762 Instruction Manual

Mounting the converter
Switch off at the mains switch
The converter must be mounted for all
2-thread seams and the 2-needle,
3-thread overedge closing seam. Detach
the lint box and open the looper cover.
Converter 6 is located in the front of the
machine housing. Pull it out.
Rotate the handwheel until the right over-
edge looper is positioned to the right of
the movable upper knife.
Rotate the converter towards the left and
press the upper part slightly to the rear so
that the tip of the converter locks into the
eye of the looper.
Insert hub A of the converter into the
aperture of the right overedge looper.
The converter can be removed by follow
ing these directions in reverse order.
21