Setting Personal Data - Omron HBF-306C Instruction Manual

You will need to enter the following information in order to get a measurement:
Normal/Athlete mode, height, weight, age and gender.
The Fat Loss Monitor provides two options to enter or save your personal data.
• Select GUEST if you do not want your personal data stored in the memory.
When you select the GUEST mode you will need to enter your personal data before
taking each measurement.
• Select a Personal Profile Number to save your personal data to memory. Select a
number 1 through 9. Use this number to enter your personal data and when taking a
measurement.
NOTE: The unit will automatically turn off after one minute if no data is entered.
1. Press the On/Off button.
All display symbols appear for approximately
one second, then the GUEST symbol starts to flash.
2. Select the GUEST or Personal Profile Number.
a. Press the Set button for the GUEST mode.
The NORMAL symbol flashes on the display.
b. Press the Up button or Down button to select
your Personal Profile Number from 1 to 9.
Press the Set button.
The NORMAL symbol flashes on the display.
SETTING THE NORMAL/ATHLETE MODE
Select NORMAL or ATHLETE based on your FIT Index. Refer to page 8 to calculate
your FIT Index.
1. Press the Up button or Down button to select NORMAL
OR ATHLETE.
2. Press the Set button.
3. The HEIGHT t icon is indicated.
The default value 5' 7'' flashes on the display.

SETTING PERSONAL DATA

14 14