Before Using the Monitor TABLE OF CONTENTS Before Using the Monitor Introduction ... 3 Safety Information ... 4 Information on Body Composition ... 6 Principles of Full Body Sensing Calculations ... 6 Body Mass Index... 7 Body Fat ... 7 Visceral Fat...
SERIAL NUMBER: Staple your purchase receipt here The Full Body Sensor Body Composition Monitor and Scale is easy to use. The monitor calculates the estimated values for body fat percentage, skeletal muscle percentage and visceral fat level using the BI (Bioelectrical Impedance) Method.
Do not use this monitor if you have a cardiac pacemaker or other implanted medical device. The Full Body Sensor Body Composition Monitor and Scale passes an extremely weak electrical current of 50kHz and less than 500µA through your body when taking a measurement to determine the amount of fat tissue. This weak current is not felt while using the monitor.
Page 5
CARE AND MAINTENANCE Do not disassemble or modify the unit. Changes or modifications not approved by Omron Healthcare will void the user warranty. Do not subject the monitor to strong shocks, such as dropping the unit on the floor.
The Omron Full Body Sensor Body Composition Monitor and Scale sends an extremely weak electrical current of 50 kHz and less than 500 µA through your body to determine the amount of water in each tissue. You will not notice or feel the electrical current.
INFORMATION ON BODY COMPOSITION BODY MASS INDEX Body Mass Index (BMI) is a number calculated from a person’s weight and height. BMI is a reliable indicator of body fatness for people. BMI does not measure body fat directly, but research has shown that BMI correlates to direct measures of body fat.
More skeletal muscle can prevent “rebound” weight gain. The Omron Full Body Sensor Body Composition Monitor and Scale tracks your progress by monitoring weight, skeletal muscle, body fat and BMI to help you reach your goals.
INFORMATION ON BODY COMPOSITION RECOMMENDED MEASUREMENT TIMES Being aware of the times when the body fat percentages shift within your daily schedule will assist you in obtaining an accurate trending of your body composition. It is recommended to use this unit in the same environment and daily circumstances.
Page 12
INFORMATION ON BODY COMPOSITION Results may differ from actual body fat percentage There are certain conditions when significant differences may occur between the estimated and the actual body fat values. These differences may be related to changing ratios of body fluid and/or body composition.
Operating Instructions Display Unit SET/MODE Button DOWN Button USER Button Display Unit Holder Main Unit (Measurement Platform) Foot Electrodes Heel Electrode Front View Components Four AA Batteries KNOW YOUR UNIT Grip Electrodes Display Power Switch Instruction Manual Grip Electrodes UP Button GUEST Button Cord Foot Electrodes...
Page 14
KNOW YOUR UNIT Guest Indicator Personal Profile Number Display Mode Indicator Gender Indicator Age Indicator Height Indicator Measurement Start Indicator Measurement Progress/Body Fat Percentage, Skeletal Muscle Percentage, Visceral Fat Level and BMI Classification Bar Low Battery Indicator Weight Results/ Body Composition Results...
Page 15
KNOW YOUR UNIT USING THE DISPLAY UNIT Remove the Display Unit from the Display Unit Holder on the monitor. To store the cord into the Display Unit Holder, make sure the cord is coiled evenly, and does not stick out of the Display Unit Holder. Place the Display Unit into the Display Unit Holder.
BATTERY INSTALLATION Locate the Battery Cover on the back of the unit. Press the tab on the battery cover in the direction of the arrow to release the cover as illustrated. Pull the tab of the cover upwards. Install 4 “AA” size batteries so the + (positive) and –...
BATTERY INSTALLATION BATTERY REPLACEMENT Personal profiles will not be deleted during battery replacement. When the Low Battery Indicator appears on the display screen, remove all four batteries. Replace with four new batteries at the same time. NOTES: • New batteries will last for approximately one year if the unit is used four times per day. Trial batteries supplied with the unit may have a shorter life.
SETTING PERSONAL DATA To measure Body Composition, your personal data must be set. Your personal data includes your age, gender and height. The Full Body Sensor Body Composition Monitor and Scale provides two options to enter your personal data. 1) Select a personal profile number to save your personal data. The monitor saves up to 4 personal profiles.
Page 19
SETTING PERSONAL DATA Select a Personal Profile Number or the Guest mode. A. Personal Profile Number 1) Press the USER button to select your personal profile number (1 through 4). 2) Press the SET/MODE button. NOTES: • If no information has been entered for the Personal Profile Number you selected, the number and the symbols for gender, age and height blink on the display.
SETTING PERSONAL DATA SETTING THE GENDER Set the gender to male or Press the UP or Press the SET/MODE button. The gender is set. The default value for height blinks on the display. SETTING THE HEIGHT Set the height between 3' 4" and 6 (Display range in metric display mode: 100.0 cm to 199.5 cm) Press the UP or...
SETTING PERSONAL DATA Select the Personal Profile Number you want to change. Press the USER button to select your personal profile number (1 through 4). The selected Personal Profile Number flashes once on the display. Press the SET/MODE button. The Personal Profile Number is set. The current setting for age blinks on the display.
HOW TO TAKE A MEASUREMENT Your personal data must be entered before taking a measurement. CAUTION: Persons with disabilities or persons that are physically frail should be assisted by another person when using this monitor or use a handrail, a walker, or other support device to prevent falling when stepping on and off the monitor.
Page 23
HOW TO TAKE A MEASUREMENT HOW TO MEASURE BODY COMPOSITION Press the Power Switch to turn the monitor ON. The CAL symbol blinks on the display, then the display changes to 0.0 lb. Wait until 0.0 lb appears on the display. NOTES: •...
Page 24
HOW TO TAKE A MEASUREMENT Select a Personal Profile Number or the Guest mode. A. Personal Profile Number Press the USER button to select your personal profile number (1 through 4). The Personal Profile Number selected will blink once. NOTE: If the following appears on the display, no personal data was entered for the number you selected.
Page 25
HOW TO TAKE A MEASUREMENT Start the measurement. Step onto the measurement platform and place your feet on the foot electrodes with your weight evenly distributed. Remain still and do not move until your weight measurement is complete. When “START” appears on the display extend your arms straight at a 90° angle to your body. When the measurement is completed, your weight is displayed again.
Page 26
HOW TO TAKE A MEASUREMENT Press the SET/MODE button to check the measurement results. The display changes with each press of the SET/MODE button as follows: FAT -> VISCERAL FAT -> BMI -> MUSCLE -> WEIGHT (again) [SKELETAL MUSCLE PERCENTAGE] [BMI] NOTES: •...
HOW TO MEASURE WEIGHT ONLY Press the Power Switch to turn the monitor ON. The CAL symbol blinks on the display, then the display changes to 0.0 lb. Wait until 0.0 lb appears on the display. NOTES: • If you step onto the monitor before 0.0 lb appears on the display, an error message “Err”...
ERROR INDICATORS ERROR CAUSE DISPLAY Your palms or feet are not positioned over the electrodes correctly. The measurement position was not stable. Your palms or feet were not placed correctly. Your palms or feet are too dry. The Body Composition values are outside the measurement range.
TROUBLESHOOTING TIPS PROBLEM Low Battery Indicator No power No display appears on the unit The weight value is displayed abnormally low or high. The Body Composition value is displayed abnormally low or high. Other conditions CAUSE AND SOLUTION Check the battery installation for proper placement of the battery polarities.
CARE AND MAINTENANCE To keep your Full Body Sensor Body Composition Monitor and Scale in the best condition and protect the monitor from damage follow the directions below: Clean the monitor with a soft dry cloth. Do not use abrasive or volatile cleaners. The monitor is not waterproof.
FCC STATEMENT NOTE: POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only) This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARRANTY Limited Warranty Your HBF-510 Full Body Sensor Body Composition Monitor and Scale, excluding the batteries, is warranted to be free from defects in materials and workmanship appearing within 1 year from the date of purchase, when used in accordance with the instructions provided with the unit. The above warranties extend only to the original retail purchaser.
Contents UPC Code NOTE: Specifications are subject to change without prior notice. OMRON Full Body Sensor Body Composition Monitor and Scale - HBF-510 Body Weight: 0 to 330 lb with 0.2 lb increments (0 to 150 kg with 0.1 kg increments) Body fat percentage: 5.0 to 60.0% with 0.1% increments...