Setting And Storing Personal Data - Omron BF508 Manual

3. Setting and Storing Personal Data

For the measurement of body fat percentage and visceral fat level, it is necessary to set your personal data (age,
gender, height).
1.
Turn on the power.
"CAL" blinks on the
display, then the
display changes to
"0.0 kg".
Note: Wait until "0.0 kg" is displayed.
2.
Press the USER
button to select
your personal
profile number.
1)
The selected
number blinks on
the display.
2)
Press the SET/
MODE button to
confirm.
Then the default
age setting blinks
on the display.
Selecting Measurement Unit
You can change the measurement units used for the height and weight settings.
1.
Turn on the power.
"CAL" blinks on the display, then the display
changes to "0.0 kg".
Wait until "0.0 kg" appears on the display.
2.
Keep the
and "kg" blink on the display.
6
button pressed until "lb"
3.
[TO SET THE AGE]
Setting range: 10 to 80 years old
1)
Press the
button to
adjust the age.
2)
Press the SET/
MODE button to
confirm.
Then the gender
icons blink on the
display.
4.
[TO SET THE GENDER AND
HEIGHT]
Set the gender (MALE) or
height in the same way.
After all the settings are displayed for your
confirmation, "0.0 kg" appears on the display.
This completes the setting.
3.
Press the button to select "kg" or
"lb".
This will also automatically change "cm" and
"in".
4.
Press the SET/MODE button to
confirm.
All height and weight measurements are displayed
using the new measurement units. The change
remains in effect until you change it again.
or
(FEMALE) and