Setting Personal Data - Omron HBF-516 Instruction Manual

Karl Loren

SETTING PERSONAL DATA

To measure Body Composition, your personal data must be set. Your personal data includes your age,
gender and height. The Full Body Sensor Body Composition Monitor and Scale provides two options to
enter your personal data.
1) Select a personal profile number to save your personal data. The monitor saves up to 4 personal
profiles. Select a number 1 through 4. Use this number to enter your personal data when taking a
measurement.
2) Select UP/GUEST button if you do not want your personal data stored in the memory. When you
use the Guest mode you will need to enter your personal data each time you take a measurement.
Measurement results are not stored in the memory when the Guest mode is used.
Buttons Used in this Procedure
Personal Profile Number Button
SET Button
Use this button to confirm the
personal data and move to the next
item after confirming the set item.
DOWN/MEMORY Button
Press this button to go back one.
Press continuously to rapidly
decrease.
1. Press the Power Switch to turn the monitor ON.
The CAL symbol blinks on the display, then the display
changes to 0.0 lb.
Wait until 0.0 lb appears on the display.
2. Lift the Display Unit out of the Display Unit Holder.
NOTE: This monitor can be set to either the US or Metric
System. Personal Profile and memory will be displayed
by selected system. To change the US/Metric mode:
1) Press and hold the
and "kg" blink on the display.
2) Press the
This will automatically change "cm" and "feet/inch" under height setting.
3) Press the SET button to confirm the change.
12/17/2013
Program Your Life
DOWN/MEMORY button until "lb"
DOWN/MEMORY button to select the mode, "lb" or "kg".
www.karlfabrication.com
Personal Profile Number Button
UP/GUEST Button
Press this button to advance one.
Press continuously to rapidly
advance.
21
21 of 44